domum » Machina in usus Quam complens

Machina in usus Quam complens

1. Implens pressura atmosphaerica: The most accurate and simple filling method for free-flowing liquid materials. Nec idoneam ad Gas ①,
② ③ noli timere ex contingentes atmosphaera et humilis viscositas liquor materiae. EG,: et vinum, fructum vinum,, lac, Ego salix feto, potio.


2.vacuum implens: ① apta airless, ② oxidative deterior condicio ob contactum cum caeli, ③ slightly viscous liquid materials and ④ toxic liquid materials. EG,: Juice, jam, surrepo, oleum, pesticide.
(1) Pure vacuum filling: same as above
(2) Gravity vacuum filling: no overflow or backflow phenomenon of pure vacuum filling. Especially suitable for
Liquor, vinum, distilled alcohol.


3. Isostatic filling: ① reduce carbon dioxide loss, ② maintain the flavor and quality of aerated beverages, ③ prevent excessive bubbles in the filling, and ④ keep the packaging measurement correct. Only suitable for filling with aerated drinks. EG,: beer, soda, champagne, mineral water.


4. Pressure canning: suitable for ① viscous materials with large viscosity and ② poor fluidity. Can increase speed. For some low-viscosity liquid materials, the fluidity is better, but because of the characteristics of the material itself or the limitations of the packaging container material and structure, other filling methods can not be used, pressure can also be used. EG,: Alcoholic beverages, hot materials, glucose for medicine.
(1) Fixed-level pressure filling: for materials that cannot be evacuated. Suitable for ① containing less oxygen
Carbonized liquid material, EG,: Some wines can keep less carbon dioxide. ② OK
In order to put materials with different viscosities into uniform packaging containers.
(2) Volumetric pressure filling: The filling pressure is implemented by the pump, which can increase the filling speed. Mainly applicable
①Viscosity liquid with higher viscosity and poor fluidity. EG,: jam, toothpaste, shoe polish,
Paste, art paint. Also suitable for some other low viscosity liquids that are not suitable for other filling methods
Bulk materials. EG,: Abe-packed injections, non-toxic plastic flexible packaging bags for infusion.


Post time: 2020-03-25
posuere autem